Sign In | Join Free | My disqueenfrance.com
China Shenzhen Topband Battery Co., Ltd logo
Shenzhen Topband Battery Co., Ltd
A professional manufacturer of LiFePO4 battery / lithium iron phosphate, dedicated to designing, researching, manufacturing, and exporting LiFePO4 batteries( cell & pack & energy storage system) to
Active Member

8 Years

Home > Rechargeable Lifepo4 Battery >

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

Shenzhen Topband Battery Co., Ltd

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

  • 1
  • 2
  • 3

Brand Name : Topband

Model Number : 20Ah / 25Ah / 50Ah / 100Ah

Certification : UL1642, IEC61233, UN38.3, EU Battery Directives

Place of Origin : China

MOQ : 1000pcs

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 1Gwh/year

Delivery Time : 2~4weeks for samples; 4~6weeks for mass production

Packaging Details : standard export carton

Type : LiFePO4( lithium iron phosphate)

Max charge : 1C

Max Discharge : 3C

Max pulse Discharge Current : 5C

Internal Impedance : ≤4mΩ

Capacity : 10AH / 12AH / 20AH / 25AH / 50AH / 100AH

Cycle life : ≥2000cycles @ 100% DOD

Warranty : 5 years

Contact Now

3.2V Rechargeable Lifepo4 Battery , Super Life Time LFP Battery Cells

  • long life & deep cycle( over 2000cycles @ 100%DOD)
  • with built-in PCM/BMS protection
  • super quick charge/discharge performance
  • safe pressure valve design ( no explosion, no fire)
  • high energy density
  • low self-discharge( <3% per month,<15% per year)
  • 1/3 weight & 1/2 volume of lead acid battery
  • eco-friendly
  • high consistency
  • no memory effect
  • easily replace lead acid battery

Lead acide battery VS. Topband LiFePO4 battery
Item Lead acid battery LiFePO4 battery Comparison results
wh/kg 30-45 100-150 LiFePO4 battery is 1/3 weight of lead acid battery
wh/L 60-80 200-250 LiFePO4 battery is 1/2 volume of lead acid battery
conclusion 1 LiFePO4 battery has higher energy density than that of lead acid battery.
cycle life 300-500cycles 2000cycles @80% DOD
1500cycles @100% DOD
LiFePO4 battery's life cycle is 5times of that of lead acid battery, and more cycles at deep discharge
conclusion 2 LiFePO4 battery has much better cycle life.
charge rate ≤0.3C 0.5-1C LiFePO4 battery can bare quick charge, eg., 2hs full charge for LiFePO4 battery, while more than 6hs for lead acid battery.
discharge rate 3-5C,only 30%-40% capacity release under 3C discharge 3-10C, 80%-90% capacity release under 3C discharge LiFePO4 battery support high rate discharge, and more capcity release under high rate discharge
conclusion 3 LiFePO4 battery has higher charge & discharge rate.
self-discharge rate 3-10% <1.5% lead acid battery will be useless for long time storage, LiFePO4 battery can stock for long time
conclusion 4 LiFePO4 battery has lower self-discharge rate.
pollution Pb( against Rohs) N/A
conclusion 5 LiFePO4 is more eco-friendly.
maitenance need fill water constantly free maitenance
conclusion 6 LiFePO4 need no maitenance.
protection NA BMS
conclusion 7 LiFePO4 has built in BMS for better control.
optional feature bluetooth connection Topband LiFePO4 allow users read battery info.
conclusion 8 Topband LiFePO4 support bluetooth connection.
warranty 12-18months 24months
conclusion 9 Topband LiFePO4 has longer warranty.
price higher
(unit price/300cycels)
15%~25% lower than SLA battery(unit price/2000cycles)
conclusion 10 LiFePO4 is more cost effective in long run.
Summary LiFePO4 battery meets the trend of development
LiFePO4 battery is better than lead acid battery from different points of view.

1. General

This Product Specification describes the technique requirements, test procedures and precaution notes of prismatic type Lithium iron phosphate rechargeable cell, manufactured by SHEN ZHEN TOPBAND BATTERY CO.,LTD.

2. Main product specification

P/N TB-12Ah TB-20Ah TB-25Ah TB-50Ah TB-100Ah
Nominal voltage 3.2V 3.2V 3.2V 3.2V 3.2V 3.2V
Nominal capacity 12 Ah 20Ah 20Ah 25Ah 50Ah 100Ah
Internal resistance ≤12mΩ ≤4mΩ ≤2mΩ ≤1.2mΩ ≤2mΩ ≤0.4mΩ
Charging voltage 3.65V 3.65V 3.65V 3.65V 3.65V 3.65V
Standard charging current 0.5C 1C 1C 1C 1C 1C
Max.constant charging current 1C 2C 5C 2C 2C 2C
Standard discharging current 0.5C 1C 1C 1C 1C 1C
Max. constant discharging current 2C 3C 10C 3C 3C 3C
Max. pulse discharge current 3C/10s 5C/10s 15C/10s 5C/10s 5C/10s 5C/10S
Operating temperature Charge: 0℃-45℃ Discharge: -20℃-55℃
Cycle life 1C/1C ≥2000 1C/1C ≥2000 1C/1C ≥2000 1C/1C ≥2000 1C/1C ≥2000 1C/1C ≥2000
Weight 310±20g 520±20g 610±20g 660±20g 1350±20g 2600±20g
Size 18*65*135mm 27*70*145mm 27*70*169mm 27*70*180mm 32*173*128mm 48*171*178mm

3. Performance Curve

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

4. Environmental Characteristics

No. Item

Test Method

Criteria

1 Temperature shock test

A cell is charged in accordance with 3.2, and then repeat the following procedures for 5 cycles, then check the cell's appearance.

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

No leakage, no fire, no explosion, no vent
2

Low-pressure

Test

A cell is charged in accordance with 3.2, then stored for 6h at a vacuum of -90KPa, after that put the cell in room temperature for 6h, then check the cell's appearance.

No leakage, no fire, no explosion, no vent
3 Vibration Test

A cell is charged in accordance with 3.2, and then installed onto the vibration desk with clamps. Equipment parameters of frequency and amplitude are set as bellow (the frequency is to be varied at the rate of 1oct/min between 10 and 55 Hz, and repeat vibration for 30 min. The cell is tested in three mutually perpendicular directions, i.e. X,Y,Z):

(a) frequency:10Hz~30Hz, amplitude: 0.38mm;

(b) frequency:30Hz~55Hz amplitude: 0.19mm

1.No scratch, no fire, no explosion, no vent;

2.The voltage is not less than 3.2V.

4

Shock Test

A cell is tested in accordance with 3.2, and then secured to the testing machine by means of rigid mount which supports all mounting surfaces of the cell. Each cell shall be subjected to a total of three shocks of equal magnitude. The shocks are to be applied in each of three mutually perpendicular directions. The acceleration and impulse time are as follows: acceleration of impulse peak value:100m/s2, shock frequency:40~80 times/min,

impulse lasting time:16 min,shock times:1000±10

1.No scratch, no leakage, no fire, no explosion, no vent;

2.the voltage is not less than 3.2V.

5. Safety test

All below tests are carried out on the equipment with forced ventilation and explosion-proof device. Before test, all cells are charged in accordance with 3.2, and stored 24h prior to test.

No. Item

Test Method

Criteria

1 Short- circuit Test A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h. No fire, no explosion
2

Overcharge

Test

A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h.

No fire, no explosion

3 Over discharge test A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h. No fire, no explosion, no leakage
4 Crush Test A cell is tested in accordance with 3.2, and then is placed on the crush flat, the axis is parallel to the crush flat, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h. No fire, no explosion
5

Impact Test

A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed. No fire, no explosion
6

nail penetration Test

a) A cell is tested in accordance with 3.2;

b) use φ5mm~φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell;

c)observe for 1h.

No fire, no explosion
7

Heating

Test(130℃)

A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min. No fire, no explosion
Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density

Product Tags:

lifepo4 battery pack

      

lithium iron phosphate cells

      
China Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density wholesale

Super Life Time LFP Rechargeable Lifepo4 Battery Cells 3.2V High Energy Density Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shenzhen Topband Battery Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0